USE A PS3 CONTROLLER ON MAC INSTALL

This is a utility created to allow the PS3 controller to appear in games as if it were an Xbox 360 controller (which is fully supported in Windows).

USE A PS3 CONTROLLER ON MAC INSTALL

Allow Windows to install the default drivers. Make sure you connect all of the controllers that you plan on using before you start the setup process. Connect all of the PS3 controllers that you want to sync via USB.Allow Windows to install the default drivers automatically after connecting it.Even if your computer already has Bluetooth support, using a separate dongle is recommended since only PS3 controllers will work with it after setup. If you plan on using your PS3 controllers wirelessly with your PC, connect a Bluetooth dongle to an open USB port on your PC. Connect your Bluetooth dongle to your computer (optional).Try connecting and syncing the controller again.Use the paperclip to press the Reset button.You can find it along the top of the backside, near the L2 button. Turn over the controller and locate the Reset button.If you still can't get your controller to sync with the PS3, you may need to reset it: Reset the controller if it still won't sync.Keep it plugged in for a few hours with the PS3 on to charge the battery. If your controller turns off after unplugging it, it may be out of charge. Charge the controller if it doesn't stay on.Bluetooth wireless functionality is only available on official Sony DualShock 3 controllers.You can now use the controller wirelessly. Disconnect the USB cable from the controller.The light that is on indicates which controller you are using (P1, P2, etc.). Once a single light is on, your controller is synced with the PS3. Wait for the controller lights to finish blinking.You'll find this button in the center of the controller. Press the PlayStation button on the controller.

You'll find two or four on the front of your PS3, depending on the model.

Connect the other end to a USB port on the PS3.

You'll find the Mini-USB port on the back of the controller.

Connect a Mini-USB cable to your controller.

Press the Power button on the front of the console.

Use a ps3 controller on mac